Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateGarage Door Company in Beverly Hills, TX
Garage door installation in Beverly Hills, TX starts with a measurement problem most installers don’t expect. This small Waco-area enclave of mid-century homes was built with detached and front-facing one-car garages on openings that rarely match today’s standard sizes, and many still carry original wood or early hollow steel doors. That means the job here is usually a custom-fit retrofit, not a builder-grade swap. We’re a single-trade garage door company, fluent across Amarr, Wayne Dalton, Craftsman and Raynor equipment, and our technicians have up to 11 years of experience. Call (855) 916-7192 to book a free measure and a written price.
Why Beverly Hills Homes Are Different
The housing stock in Beverly Hills, TX is the whole story. This is a limited, aging enclave of post-war and mid-century ranch-style single-family homes, and the garages were built small: detached, or a single bay tucked under the front of the house, on openings that were never standard to begin with. We routinely measure openings that no off-the-shelf door will fit, and we regularly find doors that are 40 years old or more and simply at the end of their life.
Then there’s the Central Texas sun. South- and west-facing garage doors take the worst of it, and that exposure accelerates paint failure and dries out wood panels until they split and warp. The humidity swings do the other half of the damage, swelling those same panels. Springs fatigue faster through the long hot season too. Occasional hail events ding steel and aluminum doors and crack older wood ones.
So Beverly Hills garage door work is preservation and modernization, not new-construction volume. If your opening is non-standard, expect a measure before anyone quotes you a number.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Main Beverly Hills Services
Two calls come up more than any other in Beverly Hills: a door that has stopped working and needs repair, and an opener that has quit on a door that’s otherwise fine. Here’s what each involves on this housing stock.
Garage Door Repair in Beverly Hills
Most repair work in Beverly Hills lands on doors that were installed decades ago, which changes what we’re looking at. Springs fatigue faster through the long hot season here, cables wear at the drums, and original wood panels dry and split on the sun-facing side of the house. We fix what’s there rather than defaulting to replacement, which protects your budget when the door still has life in it. Panels, springs, cables, tracks, rollers and hinges all get handled by the same technician. If your door is sticking, sagging, noisy or off its track, start with garage door repair and we’ll tell you honestly whether it’s a fix or a replacement.

Garage Door Opener Repair in Beverly Hills
Openers in this part of Beverly Hills are often as old as the doors they lift, and heat is hard on the electronics and the gear assemblies alike. We work on LiftMaster, Chamberlain, Genie and Craftsman units, plus the older openers still running on mid-century doors, and we diagnose the actual fault before recommending anything. Sometimes it’s a stripped gear or a failed capacitor. Sometimes it’s a door that’s out of balance and dragging the opener down with it. For a full breakdown of what we handle, see garage door opener repair. We repair first and replace only when the unit is genuinely finished.

Garage Door Installation in Beverly Hills
Garage door installation in Beverly Hills, TX is mostly retrofit work. The homes here are mid-century, the garages are detached or single-bay, and the openings were built to whatever dimension the builder chose in the 1950s and 60s, so a standard door off a shelf usually won’t fit. Add the Central Texas sun baking the west- and south-facing doors until the wood panels dry, split and warp, and you get a housing stock where doors reach end of life faster than the rest of the house. That’s where our Garage Door Installation work comes in: we measure the actual opening, order a door that fits it, and install it properly.
Garage Door Replacement
Signs you need it
You need a replacement when the door is 40-plus years old, the panels have split or warped past repair, or the opening is non-standard enough that parts no longer match up with what’s on the wall.
What it costs in Beverly Hills
New door installation in Beverly Hills typically runs $825 to $2595, depending on the door size, material and whether the opening needs framing work, and the written estimate sets the final price.
How we do it
We measure the opening precisely, order the door to fit it, remove the old door and hardware, set the new tracks and springs, hang the door, balance it and test the opener against it.
Garage Door Installation Service
Signs you need it
A new installation makes sense when you’re putting a door on an opening that has none, or when a first-time install is the cleaner path than rebuilding around a door that’s finished.
What it costs in Beverly Hills
Figure a typical estimated range of $825 to $2595 for a new door installation, with the actual figure confirmed in a written estimate after we’ve measured your opening.
How we do it
We confirm the opening dimensions and headroom, set the track and spring system, hang and align the door, then connect and test the opener so the whole system works as one.
What Garage Door Installation Costs in Beverly Hills
These are typical estimated ranges for the Beverly Hills area. A non-standard opening or framing repair can push a job toward the top of a range.
| Item | Typical range in Beverly Hills |
|---|---|
| New door installation | $825 – $2595 |
| Panel replacement | $295 – $590 |
| Opener installation | $295 – $650 |
Will a standard-size door fit my Beverly Hills garage?
Often not. Many garages in Beverly Hills were built on non-standard openings, so we measure first and order a door cut to your actual dimensions. That measure is free, and the written estimate sets the price.
Can you replace just the door and keep my existing opener?
Usually yes, as long as the opener is in good working order and rated for the new door’s weight. We test it during installation and tell you plainly if it needs replacing. Call (855) 916-7192 for a free measure.
Brands We Service in Beverly Hills
We work on the door and opener you already own. That includes Amarr, Wayne Dalton, Craftsman and Raynor equipment, along with the other major lines we handle, and we don’t push a preferred brand because the repair is the point. Parts are ordered to the job, and turnaround depends on the brand and door style. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Beverly Hills, TX
Every figure below is a typical estimated range for Beverly Hills. Your written estimate is the price you pay, and we quote it and agree it with you before any work starts.
| Service | Typical range in Beverly Hills |
|---|---|
| Garage door installation | $825 – $2595 |
| Garage door repair | $175 – $710 |
| Spring repair (one spring) | $210 – $400 |
| Cable repair | $155 – $295 |
| Opener repair | $140 – $380 |
| Opener installation | $295 – $650 |
| Panel replacement | $295 – $590 |
| Track realignment | $140 – $285 |
| Roller replacement | $130 – $260 |
In Beverly Hills, price climbs when the opening is non-standard and a door has to be made to fit, or when sun-damaged framing has to be repaired before anything new goes up. A matched pair of springs is usually replaced together, so expect about twice the single-spring range. Whatever the job, the number in your written estimate is the number on the invoice.
Neighborhoods We Serve in Beverly Hills
Beverly Hills, TX is compact, so we cover the whole enclave and the surrounding Waco-area streets without a long drive between jobs. Most of our work here is on the older single-family blocks of mid-century homes, where detached garages and one-car front bays are the norm. If your garage is on a back alley or set behind the house, tell us when you call so the technician comes prepared for the access.
We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Neighborhoods and areas we cover in and around Beverly Hills include:
- Beverly Hills proper (76711)
- The mid-century blocks off the main residential streets
- Alley-access and detached-garage properties
- Homes bordering the Waco city line
- Surrounding south Waco neighborhoods
Service Area – Cities Near Beverly Hills
Beverly Hills sits inside the Waco area, so our coverage runs outward from here into the neighboring communities. If you’re just outside the enclave, call and we’ll confirm we reach you. We also serve homeowners in Waco, TX, Bellmead, TX, Woodway, TX and Hewitt, TX, with the same free estimates and the same written price before work starts. Our home base page covers the broader area at Waco Garage Door Service.
Serving Beverly Hills, TX – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Beverly Hills
Yes. Beverly Hills is part of our core Waco-area coverage, and we handle installation, repair and opener work throughout the enclave. Call (855) 916-7192 with your address and the door or opener brand, and we’ll get you scheduled. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Permit rules vary by project type and change over time, so check with the City of Waco’s building department and your HOA before ordering a door. A like-for-like replacement sometimes doesn’t require one, while structural changes often do. We’ll tell you what the installation itself involves so you can ask the right questions.
We answer 24/7 and dispatch technicians from 7am to 7pm, Sunday through Friday. Beverly Hills is a small area close to Waco, so travel time is short, and repair calls can often be handled same-day. Holiday weekends are closed on Saturday, so a broken door that day gets booked into the next opening.
Our technicians are licensed and insured, and they work on garage doors only, not general home repair. That single-trade focus is why they can diagnose a non-standard Beverly Hills opening or an older opener quickly. Call (855) 916-7192 for a free estimate.
That’s common in Beverly Hills, and it usually means a custom-fit replacement rather than a repair that patches a door past its life. We measure the opening, order a door to match, and give you a written price before any work starts. The measure costs you nothing.
Call (855) 916-7192 and describe the door, the opener and the opening. For installation we’ll book a free measure; for repair we’ll diagnose and quote on site. Either way, you get a written estimate and we agree on the price before we start. Estimates are free.
Call (855) 916-7192 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Beverly Hills Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Ernesto Reyes"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Paige Fletcher"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Colleen Whitaker